Opens in a new tab

ASTM A691 Chrome-Moly EFW Steel Pipe: Grades, Classes and Applications

ASTM A691/A691M covers carbon and alloy steel pipe manufactured by electric-fusion welding with filler metal added. The pipe is fabricated from pressure-vessel-quality plate and is intended for high-pressure service at high temperatures. For chromium-molybdenum (Cr-Mo) applications, the specified grade identifies the plate chemistry, while the class identifies the pipe-manufacturing heat treatment, radiographic examination and pressure-test requirements. These designations must be considered together with the applicable construction code and project specification.

29316ab3c1b56c5a878ce24d69992531 1 scaled04875ebfde0af660d6f7bdffa02c861f scaled

What ASTM A691 Covers

ASTM A691/A691M applies to electric-fusion-welded carbon and alloy steel pipe made from pressure-vessel-quality plate. The standard includes several plate analyses and strength levels. Its scope, dimensions, testing and acceptance requirements are defined by the edition stated in the purchase order.

ASTM A691 is a product specification; it does not independently establish the allowable operating pressure of a completed piping system. Design pressure and temperature, material allowable stress, wall thickness, weld-joint considerations, corrosion allowance and other design inputs must be evaluated under the governing construction code, such as the applicable edition of ASME B31.1 or ASME B31.3.

Cr-Mo Grades and Plate Materials

The grade designation identifies the plate type specified by ASTM A691. The following table summarizes the Cr-Mo grade-to-plate relationships used for the grades discussed in this guide. The purchase order and the applicable edition of ASTM A691/A691M remain the controlling references.

 
ASTM A691 Cr-Mo grade Related ASTM A387/A387M plate grade Nominal alloy designation
1Cr Grade 12 1Cr–0.5Mo
1-1/4Cr Grade 11 1-1/4Cr–0.5Mo
2-1/4Cr Grade 22 2-1/4Cr–1Mo
3Cr Grade 21 3Cr–1Mo
5Cr Grade 5 5Cr–0.5Mo

Chromium and molybdenum contribute to the elevated-temperature properties and oxidation resistance of these alloy steels. The appropriate grade cannot be selected from chromium content alone. Material selection requires evaluation of the design temperature, pressure, process fluid, applicable material rules, heat treatment, and any project-specific requirements.

Understanding ASTM A691 Class Designations

ASTM A691 class designations identify three aspects of pipe manufacture and testing: the heat treatment applied to the pipe, whether radiographic examination of the weld is required, and whether the specified pressure test is required. The class is therefore more than a heat-treatment code or an X-ray category.

 
Class group Pipe heat treatment Radiography Pressure test
10–13 None Depends on individual class Depends on individual class
20–23 Stress relieved Depends on individual class Depends on individual class
30–33 Normalized Depends on individual class Depends on individual class
40–43 Normalized and tempered Depends on individual class Depends on individual class
50–53 Quenched and tempered Depends on individual class Depends on individual class

For ASTM A691, the second digit has a defined pattern within each heat-treatment family: a final digit of 0 means no radiography and no pressure test; 1 means radiography under Section 9 without the Section 8.3 pressure test; 2 means radiography under Section 9 and the Section 8.3 pressure test; and 3 means no radiography but the Section 8.3 pressure test. For example, Class 22 specifies stress relieving, radiographic examination under Section 9 and pressure testing under Section 8.3. Class 22 must not be described as spot radiography. Confirm the class table and referenced sections in the edition stated in the purchase order.

Manufacturing, Heat Treatment and Inspection

The EFW process uses plate formed into a cylindrical pipe shape and joined by an electric welding process with filler metal added. The manufacturing route, welding procedure, heat treatment and examinations must comply with the applicable ASTM A691/A691M requirements and the project specification. Welding procedure and personnel qualifications may be governed by the applicable construction code and qualification requirements, including ASME BPVC Section IX where invoked.

Heat treatment is determined by the ordered class and applicable requirements. Stress relieving, normalizing, normalizing and tempering, and quenching and tempering are distinct processes; they must not be treated as interchangeable. Heat-treatment records should be reviewed against the ordered class, material grade and pipe identification.

The standard specifies required mechanical tests, examination and pressure testing according to the ordered grade and class. Additional examinations such as ultrasonic, magnetic-particle or liquid-penetrant testing, as well as impact testing, should be identified in the purchase order or project specification when required. They should not be presented as universally mandatory for every ASTM A691 pipe.

Dimensions and Purchase Specification

ASTM A691/A691M nominally covers pipe 16 in. [400 mm] and larger in outside diameter, with wall thicknesses up to 3 in. [75 mm] inclusive; other dimensions may be supplied when they comply with the specification’s requirements. LONGMA’s stated product range for this product category is 406.4–1422.2 mm (16–56 in.) outside diameter, 7.92–75 mm wall thickness and 3–18 m length. Confirm the required dimensions and availability for each order.

A complete inquiry should identify the ASTM edition, grade, class, outside diameter, wall thickness, length, quantity, end preparation, applicable tolerances, design conditions, required examinations, pressure-test requirements, supplementary requirements, inspection arrangements and documentation. State whether wall thickness is nominal or minimum and identify the governing construction code.

ASTM A691 Compared with ASTM A335 and ASTM A672

 
Specification Manufacturing route and material Intended service stated by the specification
ASTM A691/A691M EFW pipe with filler metal added; carbon or alloy pressure-vessel-quality plate High-pressure service at high temperatures
ASTM A335/A335M Seamless ferritic alloy-steel pipe High-temperature service
ASTM A672/A672M EFW pipe with filler metal added; carbon-steel pressure-vessel-quality plate High-pressure service at moderate temperatures

ASTM A335 is not simply a moderate-temperature alternative to ASTM A691. It covers seamless ferritic alloy-steel pipe for high-temperature service. A691 and A335 differ in manufacturing route and product specification, and neither should be substituted for the other solely on the basis of nominal size or price. ASTM A672 is intended for high-pressure service at moderate temperatures and covers EFW carbon-steel pipe. Final selection depends on the design conditions, material requirements, code rules and owner specification.

Material Selection for High-Temperature and Special Service

The material engineer should assess design pressure and temperature, process composition, hydrogen partial pressure where relevant, sour-service conditions, corrosion allowance, thermal cycling and applicable damage mechanisms. For hydrogen service, the assessment should use the applicable edition and scope of API RP 941 together with the actual operating conditions. For H₂S-containing environments in oil and gas production, ISO 15156/NACE MR0175 requirements must be applied to the specific material, condition and environment; a single hardness limit should not be generalized to all ASTM A691 Cr-Mo grades.

Quality Records and Supplier Review

Before manufacture, agree on the inspection and test plan, required hold or witness points, examination coverage, acceptance criteria and document format. Depending on the order, the documentation package may include heat-specific material test reports, heat-treatment records, radiographic or other NDE reports, pressure-test results, dimensional inspection records and marking or traceability records. The required certificate type, including EN 10204 3.1 or 3.2 where specified, should be stated in the purchase documents.

LONGMA’s stated manufacturing information includes a 230,000 m² factory area and annual output exceeding 500,000 tonnes. The company manufactures round ERW and LSAW steel pipes; it does not manufacture square or rectangular hollow sections. For an ASTM A691 inquiry, confirm the exact grade, class, dimensions, inspection scope and production feasibility with the supplier before placing the order.

Conclusion

ASTM A691 Cr-Mo EFW steel pipe is specified by both grade and class. The grade identifies the plate material, while the class defines the pipe heat treatment, radiographic examination and pressure-test requirements. Correct selection also requires engineering review of design conditions, applicable construction-code rules and project-specific inspection requirements. A purchase order that clearly states the standard edition, grade, class, dimensions, testing and documentation provides a sound basis for technical review and procurement.

FAQs

What is ASTM A691 Cr-Mo EFW steel pipe?

It is electric-fusion-welded carbon or alloy steel pipe made from pressure-vessel-quality plate, with filler metal added, for high-pressure service at high temperatures. Cr-Mo grades are selected where their specified material properties meet the design requirements.

What is the difference between ASTM A691 grade and class?

The grade identifies the plate material. The class identifies the pipe heat treatment, radiographic examination and pressure-test requirements. Both designations are needed to define the product.

Does ASTM A691 Class 22 require spot radiography?

No. Under the ASTM A691 class table, Class 22 specifies stress relieving, radiographic examination in accordance with Section 9, and the pressure test in Section 8.3.

Is ASTM A691 interchangeable with ASTM A335?

No. ASTM A691 covers EFW pipe made from plate, while ASTM A335 covers seamless ferritic alloy-steel pipe for high-temperature service. Substitution requires engineering and code review.

What should an ASTM A691 RFQ include?

Specify the standard edition, grade, class, outside diameter, wall thickness, length, quantity, end preparation, design conditions, required examinations, pressure test, supplementary requirements, inspection points and documentation.

Request an ASTM A691 Pipe Inquiry

Send the required grade, class, dimensions, quantity, inspection requirements and delivery destination to LONGMA at info@ilongma.com. The technical team can review the inquiry against the stated product requirements and confirm the available manufacturing route and quotation details.

Categories

Get Free Quote

Related Article​

Wechat ID: 008618661500134

Request Free Quote