- 1. Grade and Class: What Is the Difference?
- 2. What Class 22 Requires
- 3. Material Grade and Plate Selection
- 4. Manufacturing and Welding
- 5. Stress-Relief Heat Treatment
- 6. Radiographic Examination and Pressure Testing
- 7. Grade, Class and Service Conditions
- 8. Documents to Review Before Acceptance
- 9. Frequently Asked Questions
- 10. Request an ASTM A691 EFW Pipe Enquiry from LONGMA
ASTM A691 Class 22 is a pipe class designation, not a steel grade. ASTM A691 covers carbon and alloy steel pipe made by electric-fusion welding with filler metal added, using pressure-vessel-quality plate, for high-pressure service at high temperatures. Under the class system, Class 22 identifies the specified pipe heat treatment, radiographic examination and pressure-test requirements. The material grade must be stated separately.


Grade and Class: What Is the Difference?
ASTM A691 distinguishes the plate grade from the pipe class. The grade identifies the type of plate used for the pipe, as listed by the specification. The class identifies the manufacturing heat treatment and whether radiographic examination and pressure testing are required. A complete designation therefore includes the ASTM A691 specification, the required grade and the class.
For example, an order may specify ASTM A691 Grade 2-1/4Cr Class 22. The 2-1/4Cr designation identifies the alloy grade, while Class 22 identifies the pipe’s manufacturing and examination category. Do not confuse ASTM A691 Class 22 with ASTM A387 Grade 22: the numbers belong to different designation systems.
What Class 22 Requires
| Requirement | Class 22 designation |
| Pipe heat treatment | Stress relieved, in accordance with the applicable heat-treatment provisions of ASTM A691. |
| Radiographic examination | Radiographic examination under Section 9 of ASTM A691. |
| Pressure test | Pressure testing under Section 8.3 of ASTM A691. |
The radiographic and pressure-test references are important. Class 22 should not be described as spot radiography or as a class with no pressure test. The applicable edition’s examination and pressure-test clauses define the detailed requirements. The purchase order should identify the edition of ASTM A691/A691M that governs the supply.
Material Grade and Plate Selection
The grade determines the plate material specified for the pipe, including the applicable chemical and mechanical requirements. For chromium-molybdenum grades, the plate specification and grade must match the ASTM A691 grade ordered. The exact plate grade, heat analysis and mechanical properties should be verified against the relevant tables and referenced plate specification in the applicable edition.
Do not assume that every ASTM A691 grade uses the same plate grade or that the chemical composition of one chromium-molybdenum grade can be applied to another. Review the MTC and confirm that the plate identity and heat number remain traceable through forming, welding, heat treatment and final inspection.
Manufacturing and Welding
ASTM A691 pipe is manufactured from pressure-vessel-quality plate formed into a cylindrical shape and joined by electric-fusion welding with filler metal. The specification addresses the welding process, weld reinforcement, qualification and required mechanical tests. Welding procedures and personnel qualification must meet the applicable requirements referenced by the standard, including ASME BPVC Section IX where specified.
The production record should maintain traceability between the plate heat, the formed pipe, the longitudinal seam weld and the finished pipe identification. The welding procedure, repair history and inspection records should be retained as required by the specification and purchase order.
Stress-Relief Heat Treatment
For Class 22, the pipe is stress relieved after forming and welding in accordance with the applicable ASTM A691 heat-treatment clause. The standard specifies the relevant temperature range and holding-time requirements by material grade and thickness. A single generic temperature or furnace cycle should not be applied to all grades.
The heat-treatment record should identify the pipe or batch, furnace cycle, temperature and holding period required by the applicable edition. Confirm the recorded cycle against the ordered grade, wall thickness and standard requirements. Any additional heat treatment required by the construction code or project specification should be stated separately.
Radiographic Examination and Pressure Testing
Class 22 includes radiographic examination under Section 9 and pressure testing under Section 8.3. The radiographic examination requirements, including coverage and acceptance, must be read from the applicable edition of ASTM A691 and the referenced examination provisions. Do not replace these requirements with an informal description such as spot radiography.
The pressure test must follow the applicable provisions referenced by Section 8.3. The purchase order and inspection plan should make clear whether any supplementary examination or additional testing is required by the purchaser, governing construction code or project specification. Additional ultrasonic, magnetic-particle or liquid-penetrant examination should not be represented as an automatic Class 22 requirement unless separately specified.
Grade, Class and Service Conditions
ASTM A691 is intended for high-pressure service at high temperatures, but Class 22 alone does not establish a pipe’s allowable pressure or temperature rating. The design engineer must assess the material grade, outside diameter, wall thickness, design temperature, corrosion allowance, applicable material allowable stress, weld joint factors and governing piping or pressure-equipment code.
ASTM A671 and ASTM A672 are separate electric-fusion-welded pipe specifications with different service scopes. They are not interchangeable with ASTM A691 solely because they share an electric-fusion-welding manufacturing route or use class designations. Selection must be based on the service conditions and the complete requirements of the applicable product specification.
Documents to Review Before Acceptance
- Mill test certificate identifying the ASTM A691 grade, plate heat and required chemical and mechanical test results.
- Material and product traceability records linking the plate heat to the finished pipe.
- Heat-treatment records demonstrating compliance with the Class 22 stress-relief requirements.
- Radiographic examination reports required by Section 9.
- Pressure-test records required by Section 8.3.
- Dimensional inspection reports and any supplementary test or third-party inspection records specified in the purchase order.
Frequently Asked Questions
Is ASTM A691 Class 22 a steel grade?
No. Class 22 is a pipe class designation covering stress-relief heat treatment, radiographic examination and pressure testing. The material grade must be specified separately.
Does Class 22 include radiographic examination?
Yes. Class 22 references the radiographic examination requirements in Section 9 of ASTM A691. The applicable edition defines the examination details.
Does Class 22 include a pressure test?
Yes. Class 22 references the pressure-test requirements in Section 8.3 of ASTM A691.
Does Class 22 determine the pipe’s pressure rating?
No. Pressure design depends on the grade, dimensions, design conditions and governing construction code. The class designation does not provide an allowable pressure by itself.
What should be stated in an RFQ?
State the ASTM A691/A691M edition, material grade, Class 22, outside diameter, wall thickness, length, quantity, end preparation, required supplementary requirements, inspection scope, certification and destination.
Request an ASTM A691 EFW Pipe Enquiry from LONGMA
For an ASTM A691 enquiry, provide the required grade and class, standard edition, outside diameter, wall thickness, length, quantity, design conditions and inspection requirements. LONGMA manufactures round LSAW steel pipes; send the project specification and enquiry details to info@ilongma.com for review of product scope and availability.






