- 1. What Is AS/NZS 1163 C250L0 Steel Pipe?
- 2. C250L0 Mechanical Properties, Sizes, and Quality Documents
- 3. C250L0 Applications and Grade Comparison
- 4. How to Choose and Buy C250L0 Steel Pipe
- 5. How to Screen a C250L0 Steel Pipe Supplier?
- 6. Conclusion
- 7. FAQ
- 8. Request AS/NZS 1163 C250L0 Pipe Quotes from LONGMA
A structural section made to AS/NZS 1163 is a cold-formed hollow steel section of grade C250 L0. At 0°C, the Charpy impact test shows that it has a minimum yield strength of 250 MPa. Many people who buy it call it as 1163 grade c250 l0 structural section, but engineers call it a structural hollow section. When strength, weldability, and quality records that can be tracked are important, it is used for columns, bracing, frames, and supports. Read this guide to learn about the grade code, key properties, sizes, uses, and supplier checks. This will help you write a clear order specification.


What Is AS/NZS 1163 C250L0 Steel Pipe?
A Structural Hollow Section, Not a Fluid Pipe
Cold-formed structural steel hollow sections in round, square, and rectangular shapes are covered by AS/NZS 1163:2016. These shapes are called CHS, SHS, and RHS. These parts hold weight in equipment frames, buildings, and bridges. Standards for pressure pipes, like ASTM A53, do something different. They use different tests and design rules for pipes that carry steam, water, gas, and air. Engineers write “structural hollow section” on drawings, while suppliers write “steel pipe” in their listings. The round thing can be called by either name. The cold-formed ERW process is used by LONGMA to make the circular type, CHS.
How to Read the C250L0 Grade Code
Every part of the code stands for something. “C” means that the product was made cold. In MPa, “250” is the lowest level of yield strength. “L0” is the impact class, which was tested at 0°C using the Charpy V-notch method and a minimum average force of 27 J. The temperature L0 is used for testing. It doesn’t say that it can only work at 0°C, and it doesn’t promise that it will work in all cold places. Still, the designer looks at the bottom temperature, the thickness of the wall, and the type of load. They have C250, C250L0, C350, C350L0, C450, C450L0, and C550L0 for CHS on their list.
Why the Full Specification Matters
You can’t just say “Grade 250 pipe” because that grade is used in a lot of different standards that have different test rules. I think you should write the whole thing: name of the standard and edition, grade, CHS, outside diameter, wall thickness, length, test requirements, and type of certificate. AS/NZS 1163:2016, C250L0, CHS, outside diameter of 219.1 mm, wall thickness of 8.2 mm, 12 m, and EN 10204 3.1 are examples. This line keeps the mill and inspector from having to guess, and it keeps the port from having to do extra work.
C250L0 Mechanical Properties, Sizes, and Quality Documents
Mechanical Requirements
This is what I check first for C250L0. It comes from AS/NZS 1163:2016. Before you order, make sure they match your edition, the wall thickness, and the mill test certificate.
| Property | C250L0 requirement |
| Minimum yield strength | 250 MPa |
| Minimum tensile strength | 320 MPa |
| Minimum elongation | 18% |
| Impact test | 27 J minimum average at 0°C |
These numbers show a ductile steel with a moderate level of strength. This is what makes it easy to shape and weld. Higher grades are stronger and can stretch less.
Weldability and Manufacturing Control
Steel is cold-formed into a round shape, and the seam is sealed with electric resistance welding (ERW). The standard only allows certain chemicals, like carbon equivalent, to be used for welding in the shop and on-site. The long weld needs to be strong, so I need records of the weld tests and non-destructive tests on the seam. All the way through the process, LONGMA keeps track of each item by its heating number, batch number, and product number. If a nonconforming lot shows up, we test it right away and fix it.
Sizes, Tolerances, and Certificates
When it comes to outside diameters, LONGMA sells CHS that are 114.3 mm to 1422 mm, wall thicknesses that are 6.02 mm to 50.8 mm, and standard lengths that are 3 to 12.5 m. We can talk about cutting field butt welds to custom lengths. The diameter tolerance in AS/NZS 1163 is ±1%, with a low of ±0.5 mm. The fit-up, cutting, and joint gaps are all controlled by tight tolerance. We offer EN 10204 3.1 certificates for approvals, and our factory is ISO 9001 certified. The pipe can be galvanized, and the zinc layer should be in line with the rules for your project, like AS/NZS 4680 in Australia.
C250L0 Applications and Grade Comparison
Where C250L0 Works Well
The as 1163 grade c250 l0 structural section is good for general building work. It is often used for roof trusses, platforms, walkways, equipment supports, sign structures, and conveyor frames. The wider AS/NZS 1163 range is used for industrial, mining, energy, transportation, and steel construction projects. Round shapes don’t bend the same amount in all directions, and they don’t let as much wind through as flat shapes, so they work well for exposed and tubular designs. Getting a good grade is not enough to prove suits you. The engineer still looks at the project code, the connections, the buckling length, the fatigue, the corrosion, the fire needs, and the axial load.
C250L0 Versus Higher AS/NZS 1163 Grades
Using AS/NZS 1163:2016 as a guide, this table shows the grades that buyers most often compare to C250L0.
| Grade | Min yield | Min tensile | Min elongation | Impact test |
| C250L0 | 250 MPa | 320 MPa | 18% | 27 J at 0°C |
| C350L0 | 350 MPa | 430 MPa | 16% | 27 J at 0°C |
| C450L0 | 450 MPa | 500 MPa | 12% | 27 J at 0°C |
A higher grade can cut down on wall thickness and weight, but it also has less elongation, so connection design may need to be more careful. If a project needs a colder test temperature, like an L15 class, check it with the standard edition and the mill before you place your order.
Not Automatic Equivalents: ASTM A500 and EN 10219
A lot of people in the US compare C250L0 to ASTM A500. The minimum yield stress for Grade B round tube is 290 MPa (42 ksi), and the minimum tensile stress is 400 MPa (58 ksi). By default, A500 does not set any Charpy requirements. According to EN 10219-1, S355J0H has a minimum yield strength of 355 MPa for walls up to 16 mm and a tensile strength of 27 J at 0°C. It’s part of a different system, which has its own chemistry, tolerances, and tests. Not one of these grades can be used instead of the others. The engineer of record has to sign off on any swap in writing. Order that if the drawing says AS/NZS 1163 C250L0.
How to Choose and Buy C250L0 Steel Pipe
A Simple Selection Path
I get things done quickly: I define the loads and span, then check the temperature and corrosion, then choose the diameter and wall, then confirm the joint details, then pick the coating, and finally send the RFQ. The right wall thickness balances things like weight, capacity, local buckling, and ease of welding. Thick walls are stronger, but they cost more in steel and take up more space when they’re welded. In the final design, use section tables from a manufacturer that you know you can trust to find the area, second moment of area, section modulus, and radius of gyration. Please let us know early on if your design needs a tube that isn’t round.
What to Include in Your RFQ
These things help a mill give you the right quote the first time.
- Standard and grade: Write AS/NZS 1163, the edition year, and as 1163 grade c250 l0 structural sectionin full, and note any project rules that add requirements. This prevents a quote for the wrong grade and gives the inspector a clear reference when the shipment arrives.
- Size and quantity: Give outside diameter, wall thickness, length, and tonnage or piece count. State whether random lengths are acceptable or fixed lengths are required, and mention any cut ends or bevels. Clear sizes help the mill check stock and plan production.
- Documents and delivery: List EN 10204 3.1 certificates, impact reports, coating or galvanizing needs, packing method, destination port, delivery date, and Incoterms. Quotes can then be compared line by line, which makes price comparison fair.
This kind of clear request cuts down on email back and forth and speeds up the process of getting a firm quote.
Price, Lead Time, and Landed Cost
The price is based on the cost of the raw materials, the size, the wall thickness, the order volume, testing, surface treatment, packaging, shipping by land or sea, the currency, and the terms of payment. If you don’t compare quotes based on the same grade, weight basis, certificate scope, Incoterms, and schedule, the numbers could be wrong. Some stock pipe can be sent by LONGMA in as little as 7 days. Common sizes can be sent in 30 days, and custom products can be sent in 45 days. Sea transit depends on the port of destination, so make sure you ask your forwarder about it. Full documents also protect your budget because they keep you from having to pay for rejection, delay, and retesting.
How to Screen a C250L0 Steel Pipe Supplier?
Technical Checks
Don’t start with claims; start with proof. Get a sample of the mill test certificate and make sure that the heat numbers on it match the numbers on the product. Look at the table above and compare your results for yield, tensile, elongation, and Charpy. Find out how the mill checks the weld seam, circle size, wall thickness, straightness, and who signs the reports. If you need an outside inspector for your project, agree on where they will look before they start working. An as 1163 grade c250 l0 structural section supplier who really makes things will give you records instead of general statements.
Commercial Checks
The next thing to look at is the minimum order quantity, monthly capacity, lead time, experience with exporting, available ports, loading plan, and payment terms. Find out who handles claims and how quickly they answer. Small follow-up orders are important for projects where the design changes, so ask about quantities that can be changed. Find out how to mark bundles clearly, as well as how to make packing lists. This will help customs and site receiving go more quickly. The speed of response during quoting is a good indicator of how well service will be during production.
What LONGMA Brings to Your Order
It has been making ERW and LSAW steel pipe since 2003. The business has 176 million RMB in registered capital, a 230,000 m² plant, more than 60 senior technical staff, and makes 500,000 tons of goods every year. Companies like SINOPEC, CNPC, PEMEX, PDVSA, and PTTEP have hired us to work on oil and gas projects. Our experts keep track of every order, from buying the steel plates to delivering the pipes, and write down the tests and inspections that need to be done. The heating, batch, and product numbers are used for tracking. Our CHS line has grades from C250 to C550L0, and it is certified by both EN 10204 3.1 and ISO 9001.
Conclusion
AS 1163 grade c250 l0 structural section is a grade for cold-formed structural hollow sections, not fluid pipes. Its code means a minimum yield of 250 MPa and a Charpy test at 0°C with a minimum average of 27 J. L0 refers to a test temperature, not a service limit. It is easy to shape and weld, and has a tensile strength of 320 MPa and an elongation of 18%. It can be used for columns, bracing, trusses, and equipment frames. Higher grades, like C350L0 and C450L0, make the steel stronger but less flexible. ASTM A500 and EN 10219 grades, on the other hand, have different rules and need to be approved by an engineer. To make a good purchase, you need a full specification, matching certificates, tolerance checks, traceable heat numbers, and quotes that are all the same.
FAQ
What is AS/NZS 1163 pipe?
It is a standard for structural steel hollow sections made in cold for Australia and New Zealand. It includes shapes that are round, square, and rectangular and are used in buildings, bridges, and factories. The round CHS type is sold by LONGMA.
What is the difference between C250 and C350?
C350 can hold more weight per unit of strength because its minimum yield strength is 350 MPa instead of 250 MPa. C250 is easier to shape and has a higher minimum elongation (18% vs. 16%). Changing grades needs to be approved by an engineer.
What does L0 mean?
L0 means the steel passes a Charpy impact test at 0°C, with an average force of at least 27 J. It’s just a test condition, not a coolant limit for use. The designer should find out what the coldest temperature is likely to be.
Which documents should I request?
Ask for an EN 10204 3.1 certificate that includes a packing list, dimension reports, and results for heat, chemicals, tensile, and impact.
Request AS/NZS 1163 C250L0 Pipe Quotes from LONGMA
Are you looking for a supplier of structural section AS 1163 grade c250 l0? Send LONGMA your grade, outside diameter, wall thickness, length, quantity, coating, where you want the goods delivered to, and the date of delivery. Our team will confirm the sizes that are available, the EN 10204 3.1 documents, the packing, the lead time, and the price of the project. To start your question, email info@ilongma.com or go to https://www.ilongma.com/.




